General • Inspections

Generac Diesel Generators MMG25FHI: Every 50 Hours Maintenance (Kubota Engine)

This procedure focuses on checking the fuel pipes and clamp bands of your equipment. Following the recommended interval maintenance will help your equipment run smoothly for a long period of time.

MaintainX

08/24/2022

Generac Diesel Generators MMG25FHI: Every 50 Hours Maintenance (Kubota Engine)

This procedure focuses on checking the fuel pipes and clamp bands of your equipment. Following the recommended interval maintenance will help your equipment run smoothly for a long period of time.

NOTICE!

Use the schedule in the following table as a guide for regular maintenance intervals. For additional or replacement copies of the engine operator’s manual, contact an authorized dealer in your area.

Basic Maintenance Procedure:

Check Fuel Pipes
Drain water separator
Change engine oil (Change the engine oil and oil filter after the initial 50 hours of operation, then at the appropriate interval thereafter)
Replace oil filter cartridge (Change the engine oil and oil filter after the initial 50 hours of operation, then at the appropriate interval thereafter)

Source: MaintainX (Community Member)

NOTICE!

Use the schedule in the following table as a guide for regular maintenance intervals. For additional or replacement copies of the engine operator’s manual, contact an authorized dealer in your area.

Basic Maintenance Procedure:

Check Fuel Pipes

Drain water separator

Change engine oil (Change the engine oil and oil filter after the initial 50 hours of operation, then at the appropriate interval thereafter)

Replace oil filter cartridge (Change the engine oil and oil filter after the initial 50 hours of operation, then at the appropriate interval thereafter)