Daikin Rebel Cooling and Heat Pump IM 1125: Service Maintenance

. Routine maintenance should cover the following items:

• All blowers, including furnace inducer, have sealed bearings. No lubrication is necessary.

• Tighten all wire connections.

• Clean the outside and inside coils mechanically or withcold water, if necessary. Usually any fouling is only matted on the entering air face of the coil and can be removed by brushing or vacuuming.

• Clean or replace the filters as required.

• Check for blockage of the condensate drain. Clean the condensate pan as needed.

• Check the power and control voltages.

• Check the running amperage of all motors.

• Check all operating temperatures and pressures.

• Check and adjust all temperature and pressure controls as needed.

• Check and adjust all damper linkages as needed.

• Check the operation of all safety controls.

• Check the condenser fans and tighten their setscrews.

• Periodic removal of snow drifts will be required in northern climates.