SDWAN Link Configuration - Teltonika RUT955 T- Mobile

The following is the WAN overlay settings for a Teltonika RUT955 connection required in order for the circuit to function properly.

• 1) Name: The cellular provider (usually T-Mobile)

• 2) Alerts: Checked (if using primary)

• 3) Select Interface: Check the interface where the RUT is connected.

• 4) Click Advanced

• 5) Bandwidth Measurement: Measure Bandwidth (Slow Start)

• 6) Link Mode: Active or Backup

• 7) Min Active Links: 1

• 8) MTU: 1358

• 9) Overhead Bytes: 0

• 10) Path MTU Discovery: Checked

• 11) UDP Hole Punching: Unchecked

• 12) Type: Wireless

• 13) Click Update Link