General • Maintenance

Cold Generator™ Scroll Chillers CGWR Series - Annually Maintenance

This annual procedure helps you inspect the condenser tubes for fouling and to have it cleaned if necessary. It will also let you inspect and clean the ifm efector flow detection sensors.

MaintainX

10/24/2021

Cold Generator™ Scroll Chillers CGWR Series - Annually Maintenance

This annual procedure helps you inspect the condenser tubes for fouling and to have it cleaned if necessary. It will also let you inspect and clean the ifm efector flow detection sensors.

Perform all weekly and monthly maintenance procedures.

Have a qualified service technician check the setting and function of each control and inspect the condition of and replace compressor and control contacts if needed.
If chiller is not piped to drain facilities, make sure drain is clear to carry away system water.
Drain water from condenser (CGWR only) and evaporator and associated piping systems. Inspect all piping components for leakage, damage, etc. Clean out required evaporator strainer.
Inspect condenser tubes and clean, if needed.
Clean and repaint any corroded surface.
Clean remote condenser coils (CCAR only). Refer to the condenser manufacturer’s recommendations.

Source: Trane (www.trane.com)

Perform all weekly and monthly maintenance procedures.

Have a qualified service technician check the setting and function of each control and inspect the condition of and replace compressor and control contacts if needed.

If chiller is not piped to drain facilities, make sure drain is clear to carry away system water.

Drain water from condenser (CGWR only) and evaporator and associated piping systems. Inspect all piping components for leakage, damage, etc. Clean out required evaporator strainer.

Inspect condenser tubes and clean, if needed.

Clean and repaint any corroded surface.

Clean remote condenser coils (CCAR only). Refer to the condenser manufacturer’s recommendations.