Back
General • Maintenance

Generac Diesel Generators MMG120CAN6: 3000 Hours or 36 Months Maintenance (John Deer Engine)

This procedure focuses on replacing oil vapor recirculation, testing the pressure cooling system and checking and adjusting engine valve clearance to name a few. By following the recommended interval maintenance schedule, this helps your equipment perform at its most efficient for a long period of time.
MaintainX
10/24/2021

Generac Diesel Generators MMG120CAN6: 3000 Hours or 36 Months Maintenance (John Deer Engine)

This procedure focuses on replacing oil vapor recirculation, testing the pressure cooling system and checking and adjusting engine valve clearance to name a few. By following the recommended interval maintenance schedule, this helps your equipment perform at its most efficient for a long period of time.

    NOTICE!

    Use the schedule in the following table as a guide for regular maintenance intervals. For additional or replacement copies of the engine operator’s manual, contact an authorized dealer in your area.

    Basic Maintenance Procedure:

Source: Generac (www.generacmobileproducts.com)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.