Back
General • Inspections

Chick-Fil-A Henny Penny Pressure Fryer/500, 600: Quarterly Maintenance

Use this checklist to extend the life of the lid components by lubricating the ball seat and spindle. This will help you ensure the quality performance of your equipment for a long period of time.
MaintainX
12/16/2022

Chick-Fil-A Henny Penny Pressure Fryer/500, 600: Quarterly Maintenance

Use this checklist to extend the life of the lid components by lubricating the ball seat and spindle. This will help you ensure the quality performance of your equipment for a long period of time.

    To extend the life of lid components, lubricate the ball seat and spindle, following the steps below, every 90 days.

    Lubricate Lid Spindle and Ball Seat

    • Screenshot2021-09-14at9.20.48AM.png
    • Screenshot2021-09-14at9.21.31AM.png
    • Screenshot2021-09-14at9.21.54AM.png
    • Screenshot2021-09-14at9.22.19AM.png

    Reversing the lid gasket every 90 days, helps to prevent early failure of lid gasket and the loss of pressure during a Cook Cycle.

    Reversing Lid Gasket

    • Screenshot2021-09-14at9.23.43AM.png
    • Screenshot2021-09-14at9.24.04AM.png

    Limit Stop Adjustment

    To extend the life of the lid gasket and help prevent steam leakage, check the limit stop adjustment quarterly, following the steps below:

    • Screenshot2021-09-14at9.25.37AM.png
    • Screenshot2021-09-14at9.25.55AM.png

    Check and Tighten Element Spreader

    To extend the life of the temperature probe, high limit, and elements, every 90 days check the tightness of the element spreader bar screws, following the steps below:

    • Screenshot2021-09-14at9.27.50AM.png
Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.