General • Maintenance

Daikin RoofPak RAH - IM 987: Semi-Annual Maintenance

The semi-annual maintenance procedure is for checking and replacing your equipment's R7/R8 enclosure exhaust air filter. If installed in an appropriate environment, the drive requires very little maintenance. This procedure lists the routine maintenance intervals recommended by Daikin.

MaintainX

10/24/2021

Daikin RoofPak RAH - IM 987: Semi-Annual Maintenance

Periodic Service and Maintenance:

Check all moving parts for wear every six months.
Check bearing collar, sheave, wheel hub setscrews, sheave capscrews, and bearing hold-down bolts for tightness every six months.

Setscrews

Setscrews are used to lock bearings, sheaves, locking collars, and fan wheels to their shafts. They must be checked periodically to see that they have not loosened. If this is not done, severe equipment damage could occur.

Refer to Table 21 and check the tightness of all setscrews with a torque wrench. Note that if the return fan bearings setscrews must be retightened, a special procedure is required to equally load both bearings (see “Return Fan Bearing Setscrews”).

Source: Daikin (oslo.daikinapplied.com)

Periodic Service and Maintenance:

Check all moving parts for wear every six months.

Check bearing collar, sheave, wheel hub setscrews, sheave capscrews, and bearing hold-down bolts for tightness every six months.

Setscrews

Setscrews are used to lock bearings, sheaves, locking collars, and fan wheels to their shafts. They must be checked periodically to see that they have not loosened. If this is not done, severe equipment damage could occur.

Refer to Table 21 and check the tightness of all setscrews with a torque wrench. Note that if the return fan bearings setscrews must be retightened, a special procedure is required to equally load both bearings (see “Return Fan Bearing Setscrews”).