MV & HV truck, tippers & prime mover (C) 30,000km
Equipment maintenance involves the continuous process of checking, repairing, and servicing operating equipment to ensure businesses can function without interruption.
Brisbane Diesel
04/30/2023
MV & HV truck, tippers & prime mover (C) 30,000km
Equipment maintenance involves the continuous process of checking, repairing, and servicing operating equipment to ensure businesses can function without interruption.
PRE-TASK
LUBE SERVICE
Change cabin filter
Change engine oil & filter
Drain separator bowl
Clean air filters
Grease king pins
Grease suspension bushes
Grease steering linkages
Grease drive shaft and center joints
Grease slack adjusters
Grease any AUX system point
CABIN INSPECTIONS
Check windscreen and window condition
Check window winder operation
Check mirrors and electric function
Check seat foam and condition
Check seat belts
Check seat suspension
Check wiper/washer function
Check Pedal rubbers & floor mats
Check AM/FM radio
Check instrument cluster function
Check gear selector & park brake
Check horn function
ENGINE INSPECTIONS
Check for oil, fuel, cooling leaks
Check fuel line condition and chafing
Clean banjo screens on fuel system
Prime fuel system
Check intake plumbing integrity
Check Exhaust system integrity
Check engine mount condition
check pulleys, belts and tensioners
check guarding in tact
Inspect engine harness condition & security
Check battery condition and charge rate
COOLING SYSTEM INSPECTIONS
Check water pump bearing
Check fan/viscos condition
Check radiator hoses and clamps
Check and clean radiator core
Pressure test system and check for leaks
Check overflow bottle
Check radiator mounts
POWERTRAIN/STEERING/SUSPENSION/CLUTCH/BRAKE SYSTEM INSPECTIONS
Check electrical harness to transmission
Check transmission mount integrity
Check for transmission leaks
Check uni-joints for movement
Check center bearing for movement
Check differential(s) for leaks
Check differential(s) mount bolts
Check wheel bearings for movement
Check suspension bushes for movement
Check steering linkages for movement
Check suspension spring deflection
Check tyre tread condition
Check tyre inflation levels and adjust
Check wheel nut tension
Adjust clutch
Adjust brakes
Record brake lining thickness and report
FRAME AND BODY INSPECTION
Check add blue system if applicable
Inspect air system for leaks
Drain air system
Check any AUX system components
Check suizie coils
Check turntable and grease
Check lights and lenses condition
Check cabin mounts and hinges and tilt lock mechanism
Check all panels for damage and report
Check fuel/add blue/hydraulic tank mounts
Check PTO system operation if applicable
Check tow hitch and plugs
Check any hydraulic cylinders
Reset service intervals on dash
Fill out service sticker
Source: Brisbane Diesel (Community Member)