V-One PCB Prototyping Procedure

Hardware

• A well ventilated area is recommended.

• Place the ink and solder paste in the fridge for storage.

• Connect the provided power cable to the C14 receptacle at the back of the V-One, then to an earthed socket outlet

• Connect the provided USB cable to the V-One, then to your computer

• Before you install the V-One software it is important to install the printer drivers. Most connection issues experienced are because the wrong drivers are being used.

Printing a circuit

• When you open the Voltera V-One software you will be welcomed by the start screen and it will automatically connect to the printer if it is plugged in.

• Select the print feature you want to use and follow instructions

• PRINT: Print your designed circuit pattern onto a blank FR4 board.

• SOLDER PASTE: Dispense solder paste onto fabricated or V-One printed boards.

• HEAT: Bake wet ink, and reflow components onto fabricated or V-One printed boards.

• DRILL: Drill holes of various sizes onto your blank FR1 board with the V-One Drill.

• Load your circuit

• Clamp the board to be printed on and mount the Probe

• From the software position the circuit calibrate and print

• https://docs.voltera.io/v-one/getting-started/hello-world-project/3.-getting-started-with-your-first-print