Back
General • Maintenance

Omnizone™ Constant Volume Water-Cooled Cooling Unit 50BVZ: Inspection Maintenance

This procedure is for the general and inspection maintenance of your equipment. It focuses on cleaning the unit exterior and its alignment.
MaintainX
10/24/2021

Omnizone™ Constant Volume Water-Cooled Cooling Unit 50BVZ: Inspection Maintenance

This procedure is for the general and inspection maintenance of your equipment. It focuses on cleaning the unit exterior and its alignment.

    Inspection

    Check coil baffles for tight fit to prevent air from bypassing the coil.

    • Pass
    • Flag
    • Fail

    Check panels for air leakage, particularly those sealing the fan and coil compartments.

    • Pass
    • Flag
    • Fail

    Check for loose electrical connections, compressor oil levels, proper refrigerant charge, and refrigerant piping leaks.

    • Pass
    • Flag
    • Fail

    Before start-up, be sure all optional service valves are open.

Source: Carrier (www.shareddocs.com)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.