General • Maintenance

Decorative Exhaust Fan Series DRLC703 - Use and Care

The Decorative Exhaust Fan Series DRLC703 - Use and Care ensures the cleanliness of your Exhaust Fan With quick and easy to follow steps on how to clean your exhaust fan safely and properly.

MaintainX

10/24/2021

Decorative Exhaust Fan Series DRLC703 - Use and Care

The Decorative Exhaust Fan Series DRLC703 - Use and Care ensures the cleanliness of your Exhaust Fan With quick and easy to follow steps on how to clean your exhaust fan safely and properly.

CAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE STARTING INSTALLATION.

Cleaning the Gril

Remove grill and use a mild detergent, such as dishwashing liquid, and dry with a soft cloth.
NEVER USE ANY ABRASIVE PADS OR SCOURING POWDERS. Completely dry grill before reinstalling.

Cleaning the Fan Assembly

Unplug the motor cord from receptacle and loosen the venturi screw to remove the venturi from the unit
Wipe all parts with a dry cloth or gently vacuum the fan. NEVER IMMERSE ELECTRICAL PARTS IN WATER.

CAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE STARTING INSTALLATION.

Changing the Light Bulb

Disconnect power to the unit. Remove glass light lens from grill by unscrewing knob at the top of lens
Replace light bulb(s) with 60 watt maximum, type A19 medium base incandescent bulb(s).

Reinstall the glass lens in place by sliding the hole in the lens onto the rod from the grill and securing in place with the lens knob

Source: Air King (www.airkinglimited.com)

CAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE STARTING INSTALLATION.

Cleaning the Gril

Remove grill and use a mild detergent, such as dishwashing liquid, and dry with a soft cloth.

NEVER USE ANY ABRASIVE PADS OR SCOURING POWDERS. Completely dry grill before reinstalling.

Cleaning the Fan Assembly

Unplug the motor cord from receptacle and loosen the venturi screw to remove the venturi from the unit

Wipe all parts with a dry cloth or gently vacuum the fan. NEVER IMMERSE ELECTRICAL PARTS IN WATER.

CAUTION: MAKE SURE POWER IS SWITCHED OFF AT SERVICE PANEL BEFORE STARTING INSTALLATION.

Changing the Light Bulb

Disconnect power to the unit. Remove glass light lens from grill by unscrewing knob at the top of lens

Replace light bulb(s) with 60 watt maximum, type A19 medium base incandescent bulb(s).

Reinstall the glass lens in place by sliding the hole in the lens onto the rod from the grill and securing in place with the lens knob