Back

Daikin Magnitude Magnetic Bearing Centrifugal Chillers(Magnitude WME-C): During Seasonal Shutdown Maintenance

This procedure during seasonal shutdown should only be maintained by a qualified service personnel. This procedure is to test leaks in the unit, for cleaning and testing the leaks of your equipment's condenser and your chiller unit.
MaintainX
10/24/2021

Daikin Magnitude Magnetic Bearing Centrifugal Chillers(Magnitude WME-C): During Seasonal Shutdown Maintenance

This procedure during seasonal shutdown should only be maintained by a qualified service personnel. This procedure is to test leaks in the unit, for cleaning and testing the leaks of your equipment's condenser and your chiller unit.

    The following Maintenance Procedures should only be maintained by qualified service personnel.

    Seasonal Shutdown

    WARNING!

    The condenser and evaporator are not self-draining. Where the chiller can be subject to freezing temperatures, the condenser and evaporator must be drained of all water. Water permitted to remain in the piping and vessels can rupture these parts if subjected to freezing temperatures. Dry air blown through the vessels will aid in forcing all water out.

    Except for freezing conditions, it is desirable to leave water in the vessels to avoid long term exposure to air.

    Continuous forced circulation of antifreeze through the vessels is one method of avoiding freeze up.

    Seasonal Startup

    Seasonal startup procedures are as follows:

    Condenser:

    Chiller Unit

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.