General • Maintenance

Generac Diesel Generators MMG35FHD: Every 50 Hours Maintenance (Kubota Engine)

This procedure is for the basic maintenance of your equipment by checking the fuel filter. By followig the recommended interval maintenance procedure, this will help ensure that your equipment performs at its most efficient for a long period of time.

MaintainX

10/24/2021

Generac Diesel Generators MMG35FHD: Every 50 Hours Maintenance (Kubota Engine)

NOTICE!

Use the schedule in the following table as a guide for regular maintenance intervals. For additional or replacement copies of the engine operator’s manual, contact an authorized dealer in your area.

Basic Maintenance Procedure:

Check fuel pipes and clamp bands
Drain water separator
Change engine oil (Change the engine oil and oil filter after the initial 50 hours of operation, then at the appropriate interval thereafter)
Replace oil filter cartridge (Change the engine oil and oil filter after the initial 50 hours of operation, then at the appropriate interval thereafter)

Source: Generac (www.generacmobileproducts.com)

NOTICE!

Use the schedule in the following table as a guide for regular maintenance intervals. For additional or replacement copies of the engine operator’s manual, contact an authorized dealer in your area.

Basic Maintenance Procedure:

Check fuel pipes and clamp bands

Drain water separator

Change engine oil (Change the engine oil and oil filter after the initial 50 hours of operation, then at the appropriate interval thereafter)

Replace oil filter cartridge (Change the engine oil and oil filter after the initial 50 hours of operation, then at the appropriate interval thereafter)