General • Inspections

Felins 90 Curved Conveyor Monthly

Conveyor system maintenance is needed to ensure safety and optimal efficiency. Early servicing inspections and repairs can often avoid costly breakdowns and deliver continued efficiencies to extend the life of your conveyor.

54Q Beaverton OR - Cintas

08/22/2024

Felins 90 Curved Conveyor Monthly

* LOTO Confirmation Statement - DO NOT EDIT/REMOVE *

All hazardous energy has been isolated using LOTO procedures?

All potential stored or residual energy has been relieved, disconnected, restrained, lowered, and/or otherwise rendered safe?

Lock Out Tag Out

Perform LOTO as required

Yes
No
N / A

Food Safety Pre-Check

Prior to performing this maintenance task, the areas that may be impacted unintentionally by the maintenance activities were inspected to assure no Partner’s safety is at risk and no customer product or Cintas equipment would be compromised, contaminated, or otherwise damaged due to this specific task. Any product that may be impacted was moved and / or otherwise isolated to assure protection.

Inspect reducer for leaks and oil level, fill as necessary.

Pass
Flag
Fail

Inspect drive chains, jump chains, and sprockets for wear, alignment and proper chain tension.

Pass
Flag
Fail

Check guide system wheels to ensure all bearings are intact and wheel covers are not worn through on belt curves.

Pass
Flag
Fail

Lubricate pulley shaft bearings. Use No.2 Lithium grease or equivalent. refer to manual for

Pass
Flag
Fail

Remove LOTO and return to service

Yes
No
N / A

Food Safety Post-Check

After performing this maintenance task, a review of all applicable areas that may have been impacted was conducted to assure there are no residual risks to Partner safety remaining. Also, a review of all applicable areas to ensure that no customer products were inadvertently compromised, contaminated, or otherwise damaged was conducted. If any conditions were observed indicating that any of the previous concerns have been negatively impacted, the issue was escalated to leadership.

Source: 54Q Beaverton OR - Cintas (Community Member)

Felins 90 Curved Conveyor Monthly

Felins 90 Curved Conveyor Monthly

* LOTO Confirmation Statement - DO NOT EDIT/REMOVE *

All hazardous energy has been isolated using LOTO procedures?

Yes

N/A

All potential stored or residual energy has been relieved, disconnected, restrained, lowered, and/or otherwise rendered safe?

Yes

N/A

Lock Out Tag Out

Perform LOTO as required

Food Safety Pre-Check

Inspect reducer for leaks and oil level, fill as necessary.

Inspect drive chains, jump chains, and sprockets for wear, alignment and proper chain tension.

Check guide system wheels to ensure all bearings are intact and wheel covers are not worn through on belt curves.

Lubricate pulley shaft bearings. Use No.2 Lithium grease or equivalent. refer to manual for

Remove LOTO and return to service

Food Safety Post-Check

*** LOTO Confirmation Statement - DO NOT EDIT/REMOVE ***

All hazardous energy has been isolated using LOTO procedures?

Yes

N/A

All potential stored or residual energy has been relieved, disconnected, restrained, lowered, and/or otherwise rendered safe?

Yes

N/A

Lock Out Tag Out

Perform LOTO as required

Food Safety Pre-Check

Inspect reducer for leaks and oil level, fill as necessary.

Inspect drive chains, jump chains, and sprockets for wear, alignment and proper chain tension.

Check guide system wheels to ensure all bearings are intact and wheel covers are not worn through on belt curves.

Lubricate pulley shaft bearings. Use No.2 Lithium grease or equivalent. refer to manual for

Remove LOTO and return to service

Food Safety Post-Check

* LOTO Confirmation Statement - DO NOT EDIT/REMOVE *