Back
General • Maintenance

Generac Diesel Generators MMG55FH: Annual Maintenance (John Deer Engine)

This annual procedure is for the basic maintenance of your equipment that helps in ensuring that your unit performs at its best for a long period of time. The procedure focuses on sind-wind models, top-wind models and trailer wheel bearings. By following the recommended annual procedure, you get to save downtime, money and the quality of your equipment.
MaintainX
10/24/2021

Generac Diesel Generators MMG55FH: Annual Maintenance (John Deer Engine)

This annual procedure is for the basic maintenance of your equipment that helps in ensuring that your unit performs at its best for a long period of time. The procedure focuses on sind-wind models, top-wind models and trailer wheel bearings. By following the recommended annual procedure, you get to save downtime, money and the quality of your equipment.

    JACK MAINTENANCE

    The following procedures should be performed at least annually.

    Check the torque of the generator drive plate bolts after the first 250 hours of operation, then annually.

    SIDE-WIND MODELS

    TOP-WIND MODELS

Source: Generac (www.generacmobileproducts.com)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.