Back
Fleet Management • Inspections

Freightliner Walk-In Van Chassis: Daily Pretrip Inspection and Maintenance Procedures

Use this complete daily inspection and maintenance procedures to ensure that vehicle components are in good working condition before each trip.
MaintainX
10/08/2022

Freightliner Walk-In Van Chassis: Daily Pretrip Inspection and Maintenance Procedures

Use this complete daily inspection and maintenance procedures to ensure that vehicle components are in good working condition before each trip.

    Daily Pretrip Inspections/Checks

    Daily Pretrip Inspection and Maintenance Procedures

    With the ignition switch in the OFF position, visually inspect the hydraulic system for fluid leaks.

    Inspect the hydraulic system hose(s) and fitting(s). High pressure hoses used on the hydraulic hy- brid system can be identified by their orange wrapping. Low pressure hoses are wrapped in black. If any of the following conditions are found, con- tact a certified hydraulic hybrid service technician to complete a system pressure bleed-down of the hydraulic hybrid system, and replace the hose assembly:

    Check the LPR fluid level and pressure.

    • Screenshot2021-07-09at9.43.40AM.png
    • Screenshot2021-07-09at9.44.28AM.png

    Check the active warning indicators.

    Check for system faults on the message display screen.

Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.