Back
General • Inspections

Bobcat Loader S250 Highflow Turbo Service Maintenance Every 8-10 Hours

Use this checklist as a service schedule guide for the correct maintenance of your Bobcat Loader. Maintenance work must be done at regular intervals. Failure to do so will result in excessive wear and early failures.
MaintainX
12/07/2022

Bobcat Loader S250 Highflow Turbo Service Maintenance Every 8-10 Hours

Use this checklist as a service schedule guide for the correct maintenance of your Bobcat Loader. Maintenance work must be done at regular intervals. Failure to do so will result in excessive wear and early failures.

    Engine Oil

    Engine Air Filter and Air System

    Engine Cooling System

    Fuel Filter

    Lift Arms, Cylinders, Bob-Tach Pivot Pins and Wedges

    Seat Bar, Control Interlocks, Seat Belt, Seat Belt Retractors

    Bobcat Interlock Control Systems (BICS™)

    Safety Signs and Safety Treads

    Operator Cab

    Indicators and Lights

    Heater and A/C Filters (If Equipped)

Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.