Back
General • Maintenance

Generac Diesel Generators MDG150DF4-STD3: Every 6000 Hours or 72 Months Maintenance

This procedure is for flushing and refilling the cooling system and testing the thermostat of your equipment. This will help in ensuring that your equipment safely and properly performs for a long period of time.
MaintainX
10/24/2021

Generac Diesel Generators MDG150DF4-STD3: Every 6000 Hours or 72 Months Maintenance

This procedure is for flushing and refilling the cooling system and testing the thermostat of your equipment. This will help in ensuring that your equipment safely and properly performs for a long period of time.

    NOTICE!

    Refer to the original equipment manufacturer’s operating manual for a complete list of maintenance requirements. Failure to comply with the procedures as described in the engine operator’s manual will nullify the warranty, decrease performance and cause equipment damage or premature equipment failure. Maintenance records may be required to complete a warranty request.

    Basic Maintenance:

Source: Generac (www.generacmobileproducts.com)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.