Back
General • Inspections

Daikin Roofpak Heating and Cooling MD5 VFD - IM 1191: Every 6 Years Maintenance

This procedure is for replacing your equipment's drive module fan. If installed in an appropriate environment, the drive requires very little maintenance. This procedure lists the routine maintenance intervals recommended by Daikin.
MaintainX
08/10/2022

Daikin Roofpak Heating and Cooling MD5 VFD - IM 1191: Every 6 Years Maintenance

This procedure is for replacing your equipment's drive module fan. If installed in an appropriate environment, the drive requires very little maintenance. This procedure lists the routine maintenance intervals recommended by Daikin.

    Maintenance Intervals

    If installed in an appropriate environment, the drive requires very little maintenance. This table lists the routine maintenance intervals recommended by Daikin.

    • Screenshot2021-02-26at7.00.59AM.png

    Maintenance:

    Application:

    Interval:

    Instruction:

    Drive Module Fan Replacement

    The drive module fan cools the heatsink. Fan failure can be predicted by the increasing noise from fan bearings and the gradual rise in the heatsink temperature in spite of heatsink cleaning. If the drive is operated in a critical part of a process, fan replacement is recommended once these symptoms start appearing. Replacement fans are available from Daikin. Do not use other than Daikin specified spare parts.

    Clean the heatsink as follows (when necessary):

    Frame Sizes R1—R4

    To replace the fan:

    • Screenshot2021-02-26at7.50.57AM.png

    Frame Sizes R5 and R6

    To replace the fan:

    • Screenshot2021-02-26at7.52.28AM.png
Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.