Back
Manufacturing / Industrial • Maintenance

Cleaver Brooks Electric Boiler - CR 750-137 Annually Maintenance

MaintainX
04/26/2021

Cleaver Brooks Electric Boiler - CR 750-137 Annually Maintenance

    Element Replacement Procedure

    Warning: Before element replacement, lockout and disconnect the main power. Also, before element replacement, make certain the boiler is cooled to an ambient temperature before draining below the element opening. Failure to heed this warning could result

    Replacement of Individual Elements

    FIGURE 4-2. Heating Elements

    NOTE: To assist in breaking free the gasket, insert one of the flange bolts into the tapped hole provided.

    NOTE: Since the elements often differ in length, check to assure that there is an adequate clearance (3/4” min.) between the end of the element and the opposite side vessel wall. Check by measuring both the element extension (from flange to tip) and the d

Source: Cleaver Brooks

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.