Back
General • Maintenance

K-Series (2-7.5 KGA): Monthly Maintenance

This procedure focuses on motor lubrication and that units are equipped with temporary filters are changed. The main purpose of regular maintenance is to ensure that all equipment required for production is operating at 100% efficiency at all times.
MaintainX
10/24/2021

K-Series (2-7.5 KGA): Monthly Maintenance

This procedure focuses on motor lubrication and that units are equipped with temporary filters are changed. The main purpose of regular maintenance is to ensure that all equipment required for production is operating at 100% efficiency at all times.

    A-Filters

    Units are equipped with temporary filters which must be replaced prior to building occupation. See table 27 for correct filter size. Refer to local codes or appropriate jurisdiction for approved filters. Approved filters should be checked monthly and replaced when necessary. Take note of air flow direction marking on filter frame when reinstalling filters

    • Screenshot2021-02-17at8.39.22AM.png

    NOTE-Filters must be U.L.C. certified or equivalent for use in Canada.

    • Screenshot2021-02-17at8.40.01AM.png

    B-Lubrication

    All motors are lubricated at the factory. No further lubrication is required.

Source: Allied Commercial (s7d2.scene7.com)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.