Back
General • Inspections

Bunn ITCB Infusion Series Tea & Coffee Brewer -Dual Volt, 29" W/Tray: Daily Cleaning Checklist

In order to maintain proper operation and long service life BUNN® recommends performing the preventive maintenance. To ensure you get a fresh, healthy brew when every time you use your Bunn Coffee Maker, cleaning of any removable parts is important. To get the best flavor from your mug of coffee, every part of the machine needs to be kept clean.
MaintainX
12/07/2022

Bunn ITCB Infusion Series Tea & Coffee Brewer -Dual Volt, 29" W/Tray: Daily Cleaning Checklist

In order to maintain proper operation and long service life BUNN® recommends performing the preventive maintenance. To ensure you get a fresh, healthy brew when every time you use your Bunn Coffee Maker, cleaning of any removable parts is important. To get the best flavor from your mug of coffee, every part of the machine needs to be kept clean.

    CAUTION – CLEAN AND SANITIZE YOUR ICED TEA BREWER DAILY

    Remove and thoroughly rinse the sprayhead. The holes must be open and clear of any mineral deposits. Wipe the sprayhead panel clean with a damp cloth.

    NOTE – Any buildup on the sprayhead may restrict water flow, and impact your brewing. For consistently great tea and coffee, clean sprayhead weekly with sprayhead cleaning tool (#38227.0000). Upon visual inspection it may appear that light passes through all holes in the sprayhead, but a thin film of residue can pass light and still impede water flow.

    CAUTION – DO NOT KEEP BREWED ICED TEA OVERNIGHT. THE SERVER MUST BE CLEANED DAILY

    TANK DRAIN

    NOTE: Do not tighten white clamp!

    SANITIZING OPTIONAL SWEETENER

    All Models:

    Models with factory installed sweetener:

    Remove the special sanitizing fittings, or empty, cut B.I.B fittings from the B.I.B. disconnects (QCD’s) and re-connect the QCD fittings to the appropriate B.I.B. container. (You will now begin the process of bringing syrup back through the system)

    Models with field installed sweetener kit:

    The next steps are to initiate a brew cycle and draw sanitizer through the system:

    Remove the special sanitizing fittings, or empty, cut B.I.B fittings from the B.I.B. disconnects (QCD’s) and reconnect the QCD fittings to the appropriate B.I.B. container. (You will now begin the process of bringing syrup back through the system)

Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.