Back
General • Inspections

JLG Vertical Mast SSV-10: Function Check

As with all heavy equipment, it’s important to inspect and maintain your and boom lifts to ensure they’re running efficiently and improving your productivity. This checklist will help you in inspecting these machines at the start of every day, at shift changes and any time a new operator takes over the machine.
MaintainX
10/13/2022

JLG Vertical Mast SSV-10: Function Check

As with all heavy equipment, it’s important to inspect and maintain your and boom lifts to ensure they’re running efficiently and improving your productivity. This checklist will help you in inspecting these machines at the start of every day, at shift changes and any time a new operator takes over the machine.

    Perform the Function Check as follows:

    From the ground control console with no load in the platform:

    From the platform control console:

    Operate all functions and check all limiting and cut-out switches to ensure proper operation:

    Machine Brakes

    Tilt Warning Limit

    Drive Speed Reduction Limit

    Platform Joystick Enable, Footswitch Enable, and Left Hand Lift Enable

    Raise and lower platform 2 ft to 3 ft (0.61 m to 0.92 m) several times. Check for smooth lifting and lowering of platform.

    Platform Gate Open (Australian Spec. Machines Only)

    Ensure the Object Detection System (if equipped) functions properly (refer to Section — Machine Operation):

Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.