General • Inspections

Bobcat Utility Vehicle 2200D: Performance Inspection Checklist

Use the following checklist as a guide to inspect the vehicle and check daily for proper operation. Any problems should be corrected by a Bobcat dealer or a trained technician.

MaintainX

12/07/2022

Bobcat Utility Vehicle 2200D: Performance Inspection Checklist

Use the following checklist as a guide to inspect the vehicle and check daily for proper operation. Any problems should be corrected by a Bobcat dealer or a trained technician.

Use the following checklist as a guide to inspect the vehicle. This checklist should be used daily to ensure that the vehicle is in proper working condition and in conjunction with the on page 24. Any problems should be corrected by a Bobcat dealer or a trained technician.

Forward/Reverse shifter:

All the parts should be in place and properly installed. Be sure that all nuts, bolts, and screws are tight. Check hose clamps for tight fit.

Forward/Reverse shifter:

Check for proper operation. See CONTROLS AND INDICATORS on page 3.

https://drive.google.com/file/d/1dJ1sFdB73sQ-VaRitCIGO8XU8QPuMmdN/view

Brakes:

Be sure the brakes function properly. When brake pedal is fully pressed under moderate pressure, the vehicle should come to a smooth, straight stop. If the vehicle swerves or fails to stop, have the brake system checked and adjusted as required. When brake pedal is fully pressed under heavy pressure, pedal should feel firm and the back of the pedal should be a minimum of 1.25 inches (3.2 cm) from floorboard. Brake adjustment must be maintained so the brake pedal cannot be pressed to the floorboard under any

Park brake:

When latched, the park brake should lock the wheels and hold the vehicle stationary (on an incline of 20% or less).

Reverse buzzer:

The reverse buzzer should sound as a warning when the Forward/Reverse handle is in the REVERSE position.

Steering:

The vehicle should be easy to steer and should not have any play in the steering wheel. Be sure the steering wheel adjustment lever is locked into position.

Accelerator:

After starting the engine with the key switch and placing the Forward/Reverse handle in the FORWARD position, the vehicle should accelerate smoothly to full speed as the accelerator pedal is pressed. When the pedal is released it should return to the original position and the engine should idle. Bobcat vehicles operate at reduced speed in reverse.

Governor:

Check maximum vehicle speed. It should operate in forward at 40 km/h (25 mph) on a level surface.

General:

Listen for any unusual noises such as squeaks or rattles. Check the vehicle’s ride and performance. Have a Bobcat dealer or a trained technician investigate anything unusual.

Source: MaintainX (Community Member)