Back
General • Inspections

Generac Diesel Generators MDG100DF4: Annual Maintenance

The annual maintenance procedure focuses on the Jack maintenance, side-wind models, top-wind models, and trailer wheel bearings. The annual procedure helps in ensuring that your equipment performs safely and properly for a long period of time.
MaintainX
09/06/2022

Generac Diesel Generators MDG100DF4: Annual Maintenance

The annual maintenance procedure focuses on the Jack maintenance, side-wind models, top-wind models, and trailer wheel bearings. The annual procedure helps in ensuring that your equipment performs safely and properly for a long period of time.

    JACK MAINTENANCE

    Side-Wind Models

    Top-Wind Models

    • Screenshot2021-03-25at12.49.39PM.png

    TRAILER WHEEL BEARINGS

    The trailer axles are equipped with a grease zerk fitting to allow lubrication of the wheel bearings without the need to disassemble the axle hub. To lubricate the axle bearings, remove the small rubber plug on the grease cap, attach a standard grease gun fitting to the grease zerk fitting and pump grease into the fitting until new grease is visible around the nozzle of the grease gun. Use only a high quality grease made specifically for lubrication of wheel bearings. Wipe any excess grease from the hub wit

Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.