Back

Ductility Mold Calibration Record

A calibration record for ductility molds, including detailed measurements, maintenance items, and recommended actions for multiple molds.
Ergon - Lubbock 14842
06/05/2024

Ductility Mold Calibration Record

A calibration record for ductility molds, including detailed measurements, maintenance items, and recommended actions for multiple molds.

    Date

    Performed By

    Equipment/Model

    Caliper ID

    Mold 1

    Fill in values measured (mm)

    (A) Distance between centers (11.5 to 113.5 mm)

    (B) Total Length (74.5 to 75.5 mm)

    (F) Width at minimum cross section (9.9 to 10.1 mm)

    (C) Between clips (29.7 to 30.3 mm)

    (H) Distance (Center of Radius) (42.9 to 43.1 mm)

    (E) Radius (15.75 to 16.25 mm)

    (G) Width at mouth of clip (19.8 to 20.2 mm)

    (I) Hole diameter (6.5 to 6.7 mm)

    (D) Shoulder (6.8 to 7.2 mm)

    (J) Thickness (9.9 to 10.1 mm)

    Mold 2

    Fill in values measured (mm)

    (A) Distance between centers (11.5 to 113.5 mm)

    (B) Total Length (74.5 to 75.5 mm)

    (F) Width at minimum cross section (9.9 to 10.1 mm)

    (C) Between clips (29.7 to 30.3 mm)

    (H) Distance (Center of Radius) (42.9 to 43.1 mm)

    (E) Radius (15.75 to 16.25 mm)

    (G) Width at mouth of clip (19.8 to 20.2 mm)

    (I) Hole diameter (6.5 to 6.7 mm)

    (D) Shoulder (6.8 to 7.2 mm)

    (J) Thickness (9.9 to 10.1 mm)

    Mold 3

    Fill in values measured (mm)

    (A) Distance between centers (11.5 to 113.5 mm)

    (B) Total Length (74.5 to 75.5 mm)

    (F) Width at minimum cross section (9.9 to 10.1 mm)

    (C) Between clips (29.7 to 30.3 mm)

    (H) Distance (Center of Radius) (42.9 to 43.1 mm)

    (E) Radius (15.75 to 16.25 mm)

    (G) Width at mouth of clip (19.8 to 20.2 mm)

    (I) Hole diameter (6.5 to 6.7 mm)

    (D) Shoulder (6.8 to 7.2 mm)

    (J) Thickness (9.9 to 10.1 mm)

    Mold 4

    Fill in values measured (mm)

    (A) Distance between centers (11.5 to 113.5 mm)

    (B) Total Length (74.5 to 75.5 mm)

    (F) Width at minimum cross section (9.9 to 10.1 mm)

    (C) Between clips (29.7 to 30.3 mm)

    (H) Distance (Center of Radius) (42.9 to 43.1 mm)

    (E) Radius (15.75 to 16.25 mm)

    (G) Width at mouth of clip (19.8 to 20.2 mm)

    (I) Hole diameter (6.5 to 6.7 mm)

    (D) Shoulder (6.8 to 7.2 mm)

    (J) Thickness (9.9 to 10.1 mm)

    Mold 5

    Fill in values measured (mm)

    (A) Distance between centers (11.5 to 113.5 mm)

    (B) Total Length (74.5 to 75.5 mm)

    (F) Width at minimum cross section (9.9 to 10.1 mm)

    (C) Between clips (29.7 to 30.3 mm)

    (H) Distance (Center of Radius) (42.9 to 43.1 mm)

    (E) Radius (15.75 to 16.25 mm)

    (G) Width at mouth of clip (19.8 to 20.2 mm)

    (I) Hole diameter (6.5 to 6.7 mm)

    (D) Shoulder (6.8 to 7.2 mm)

    (J) Thickness (9.9 to 10.1 mm)

    Mold 6

    Fill in values measured (mm)

    (A) Distance between centers (11.5 to 113.5 mm)

    (B) Total Length (74.5 to 75.5 mm)

    (F) Width at minimum cross section (9.9 to 10.1 mm)

    (C) Between clips (29.7 to 30.3 mm)

    (H) Distance (Center of Radius) (42.9 to 43.1 mm)

    (E) Radius (15.75 to 16.25 mm)

    (G) Width at mouth of clip (19.8 to 20.2 mm)

    (I) Hole diameter (6.5 to 6.7 mm)

    (D) Shoulder (6.8 to 7.2 mm)

    (J) Thickness (9.9 to 10.1 mm)

    Maintenance Items

    Action Recommended

    Comments

Source: Ergon - Lubbock 14842 (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.