Back
General • Inspections

Magneto 500 hours Inspection

Perform inspection service support manual S20/S200 Series High Tension Magneto, CMI SB 643, CMI SB 658, CMI SB 663, CMI SB 670
OMA EUROFISH
07/15/2022

Magneto 500 hours Inspection

Perform inspection service support manual S20/S200 Series High Tension Magneto, CMI SB 643, CMI SB 658, CMI SB 663, CMI SB 670

    Description

    Manufacturer

    Hours

    Type

    Part Number

    Serial Number

    Tolerances

    Cam Washer Thickness (0.095+-0.010)

    Capacitor 0.375 ufarads +- 10% --- 1.0 ohm feed through (maximum) --- 0.4 uAmpere leakage (maximum) at 400 VDC

    Coil

    Primary 0.2 to 0.6 ohm

    Secondary 12.000 to 16.000 ohm

    Contact Point Clearance

    Main

    Retard

    Tachometer

    "E" Gap

    Main

    Retard

    Distribuitor Block

    Electrode Wear (0.933 + 0.000/-0.023)

    Contact spring height

    • Pass
    • Flag
    • Fail

    Bushing inside check (0.376 - 0.377)

Source: OMA EUROFISH (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.