Back
Property Management • Maintenance

Coleman CP9C Gas Furnace Maintenance

The Coleman CP9C Gas Furnace Maintenance ensures that the components of your furnace perform at high quality. Avoid hazards by following the precautions mentioned.
MaintainX
04/26/2021

Coleman CP9C Gas Furnace Maintenance

The Coleman CP9C Gas Furnace Maintenance ensures that the components of your furnace perform at high quality. Avoid hazards by following the precautions mentioned.

    FURNACE MAINTENANCE - USER INFORMATION

    WARNING: Before proceeding, be sure the area is well ventilated. Turn the thermostat OFF. If the blower is running, wait until it stops automatically. Turn OFF the gas and electrical power supplies to the furnace. Check all metal parts and surfaces to be

    EXTERNAL AIR FILTERS

    Every time the external air filters are changed the following items should be visually inspected:

    If during the inspection of your furnace, you find any oIf during the inspection of your furnace, you find any of the following conditions:f the following conditions:

    How to Clean your Filter

    BLOWER CARE

    NOTE: The spring-loaded safety cut-off switch, mounted at the blower deck will automatically cut off the electrical power supply to the furnace when the furnace blower access panel/door is removed. As a safety precaution, all electrical power and the gas

    WARNING: Make sure you DO NOT move the clip on weight on the indoor fan wheel when cleaning the wheel. This weight is used to balance the wheel. Moving the weight will cause the fan wheel to vibrate.

    MOTOR LUBRICATION

    SERVICE INFORMATION TROUBLESHOOTING PROBLEMS

    If your furnace is not operating correctly, the following visual checks should be made before contacting your local contractor, dealer, or service provider.

    FURNACE CONTROL DIAGNOSTICS

    SLOW GREEN FLASH

    DOUBLE AMBER FLASH

    SLOW AMBER FLASH

    RAPID RED FLASHES

    FURNACE MAINTENANCE - DEALER/CONTRACTOR

    The furnace should be cleaned and adjusted by a certified dealer or qualified service contractor once a year or before the start of every heating season. The following items must be cleaned and serviced or replaced if there are signs of deterioration

    REPLACEMENT PARTS LIST

    WIRING DIAGRAM

Source: Coleman

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.