Bryant Heating and Cooling System 280A Heat Pump Every 3 Months Maintenance
The Bryant Heating and Cooling System 280A Heat Pump Every 3 Months Maintenance is a quarterly preventive maintenance form that is simple and straightforward. It provides a checklist for thorough inspections assuring you quality performance by your equipment. Follow the precautionary measures in the form to avoid risks and ensure safety.
Bryant Heating and Cooling System 280A Heat Pump Every 3 Months Maintenance
The Bryant Heating and Cooling System 280A Heat Pump Every 3 Months Maintenance is a quarterly preventive maintenance form that is simple and straightforward. It provides a checklist for thorough inspections assuring you quality performance by your equipment. Follow the precautionary measures in the form to avoid risks and ensure safety.
WARNING: ELECTRICAL SHOCK HAZARD Failure to follow this warning could result in personal injury or death. Disconnect all electrical power to the indoor air handler or furnace before removing access panels to perform any maintenance. Disconnect power to bo
Fig. 1 -- Electrical Disconnects
CAUTION: PERSONAL INJURY AND/OR PRODUCT AND PROPERTY DAMAGE HAZARD Failure to follow this caution may result in personal injury or product and property damage. Although special care has been taken to minimize sharp edges in the construction of your unit,
Keep Filter Clean
Do Not Block Floor, Wall or Ceiling Vents
Do Not Cover or Block Outdoor Unit
Check Condensate Drain
Do Not Operate Below 55°F/12.78°C in Cooling Mode
Do Not Operate Above 66°F/18.89_C in Heating Mode
Base Pan Drainage
Level Installation
SEA COAST COIL MAINTENANCE
TROUBLESHOOTING
Before you request dealer service, check for these easily solved problems:
REGULAR DEALER MAINTENANCE
Your annual system inspection should include:
Source: Bryant