BUNN | LCR-2 (with Scholle 1910 1/8") - Daily Cleaning & Preventive Maintenance Instructions

Note: The BUNN® Liquid Coffee Dispenser incorporates a “user selectable” rinse reminder feature, which lights the Rinse LED on the front panel and disables dispensing when it is time to rinse. See Programming Functions to activate this feature.

Daily: RINSING

• Open the dispenser door

• Select Rinse on the Function Selector Switch and Run on the Mode Selector Switch

• Close the dispenser door.

• Place a 1/2 gal (2 liter) container under the appropriate dispense nozzle or nozzles.

• Activate the dispenser on the appropriate side or sides for approximately twenty seconds or until the hot water is clear or has no concentrate coloring in it.

• Open the dispenser door, select Normal on the Function Selector Switch, and then close door.

• Note: To clear the “Rinse” alarm, activate the dispenser until the flow stops automatically (approx. 20 seconds for each tip). The “Rinse” alarm LED will turn off when the Rinse Procedure has been satisfied for both sides.

Daily: PARTS WASHING

• Remove and wash the drip tray, drip tray cover, and cup tray in a mild detergent solution. Rinse thoroughly.

• Wipe splash panel, area around dispense nozzles, door, and cabinet with a clean damp cloth.

PREVENTIVE MAINTENANCE

• Bunn-O-Matic® Corporation recommends that preventive maintenance be performed at regular intervals. Maintenance should be performed by a qualified service technician. For Technical Service, contact Bunn-O-Matic® Corporation at 1-800-286-6070

• NOTE: Replacement parts or service caused by failure to perform required maintenance is not covered by warranty. Replace pump hoses every 6-Months or as needed.