General • Inspections

JLG BOOM LIFTS E45A: Battery Charging (On Board Charger)

Use this battery maintenance checklist to ensure your battery keeps functioning as it should be. This will also help you avoid from getting a new battery by regularly checking your vertical mast.

MaintainX

10/12/2022

JLG BOOM LIFTS E45A: Battery Charging (On Board Charger)

Use this battery maintenance checklist to ensure your battery keeps functioning as it should be. This will also help you avoid from getting a new battery by regularly checking your vertical mast.

For maximum battery life:

Avoid completely discharging the batteries.
Fully charge the batteries each day the machine is used.
Charge the batteries at available times between charging.
Be sure the battery fluid covers the battery plates before charging, buffo avoid overflow, do not top off the fluid level until charging.

To charge the batteries, connect the charger to a 115 volt source with a 15 amp minimum capacity.

The Charger will shut off automatically when the batteries are fully charged.

The charge cycle is complete when the ammeter reads 0 amps. Any reading indicates the charge cycle is not complete.

Depleted batteries will take approximately 17 hours to charge.

Source: MaintainX (Community Member)

For maximum battery life:

Avoid completely discharging the batteries.

Fully charge the batteries each day the machine is used.

Charge the batteries at available times between charging.

Be sure the battery fluid covers the battery plates before charging, buffo avoid overflow, do not top off the fluid level until charging.

To charge the batteries, connect the charger to a 115 volt source with a 15 amp minimum capacity.

The Charger will shut off automatically when the batteries are fully charged.

The charge cycle is complete when the ammeter reads 0 amps. Any reading indicates the charge cycle is not complete.

Depleted batteries will take approximately 17 hours to charge.