Home
Pricing

Pricing

General • Inspections

Bunn ICB Twin Tall Stainless Steel - 120/240V: Cleaning Instructions (Cleaning Card)

Use this checklist for the daily cleaning of your coffee machine. It provides many benefits including general hygiene and improving the taste of your coffee.

MaintainX

12/07/2022

Bunn ICB Twin Tall Stainless Steel - 120/240V: Cleaning Instructions (Cleaning Card)

Use this checklist for the daily cleaning of your coffee machine. It provides many benefits including general hygiene and improving the taste of your coffee.

Brewing

Begin each brew cycle with a clean, empty Smart Funnel®and server. Insert a BUNN® filter into the funnel.

Pour a packet or grind fresh coffee into the filter. Level the bed of grounds by gently shaking. Slide the loaded brew funnel into the funnel rails until it stops.

Make sure the ENABLE BREW switch is ON. Press the switch of the desired batch size. Press the Brew Switch (A, B, or C) assigned to the desired product/recipe.

When the coffee no longer drips from the funnel tip and funnel lock retracts, carefully remove the Smart Funnel and discard the used grounds. Thoroughly clean and rinse the Smart Funnel to be ready for next brew cycle

Fresh coffee is available and ready to be dispensed from the TF Server or Airpot. Ready the TF Server or Airpot by ensuring the server is empty and clean before positioning under the Smart Funnel for th

CLEANING - BREWER

Remove Smart Funnel. Unscrew the Peak ExtractionTM sprayhead. Underside View: CounterClockwise/Turn Left

Once the Peak Extraction sprayhead is removed, set aside to be cleaned.

Insert the sprayhead cleaning tool into the Sprayheadand By-pass outlet fitting, rotate several times to remove any mineral deposits from the fitting.

Use a clean damp cloth rinsed in any mild nonabrasive , liquid detergent to wipe down the sprayhead panel.

Use a clean damp cloth rinsed in any mild nonabrasive , liquid detergent to clean all surfaces on Bunn-O-Matic® equipment.

Grab the Peak Extraction sprayhead that was set aside earlier and separate apart by removing the black sprayhead seal.

Prepare a warm soapy solution (140° F). Submerge all the separated sprayhead parts in the soapy solution.

Wash all individual sprayhead parts. Ensure all sprayhead holes are fully open and clear of any product residue or mineral deposit build-up.

After washing the sprayhead parts, thoroughly rinse the parts with clean water.

Reassemble the Peak Extraction sprayhead and screw onto the threaded outlet fitting. Underside View: Clockwise/ Turn Right

Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.

Similar procedures

Lockout Tagout Procedure Inspection Requirements
MaintainX
07/26/2022
JLG BOOM LIFTS 460SJ: Daily Walk Around Inspection
MaintainX
10/13/2022
Generac Diesel Generators MDG250DF4-STD3: Every 6000 Hours or 72 Months Maintenance
MaintainX
09/08/2022
Maintenance
Byron Bay Superfoods
08/15/2023
SOP - Platform, Fixing, Cleaning and Bulkheading Containers
Export - Newark
09/26/2024
Bi-Weekly Titan Maintenance - Titan #3 - #144
MaintainX
07/06/2023
Mack | 2012 Mack CMH Australia Right Hand Drive - During the First 5000 Kilometers (3,000 Miles)
MaintainX
12/28/2022
CenTraVac Water-Cooled Chiller CDHH 2 - Quarterly Maintenance
MaintainX
08/10/2022
Industrial Grade Pedestal Fans 9135 - Maintenance
MaintainX
08/19/2022
City of Portland Marijuana Retailer Courier Application Checklist
MaintainX
07/19/2022
Mack | 2012 Mack CMH Australia Right Hand Drive - Driver's Daily Walk-Around Inspection
MaintainX
12/28/2022
Ascend™ Air-Cooled Chiller ACR: Annual Maintenance
MaintainX
08/10/2022
Bobcat Loader Mechanic Skid Steer 741: Every 250 Hours Maintenance
MaintainX
12/07/2022
Generac Diesel Generators MMG45K: Every 500 Hours Maintenance (Kubota Engine)
MaintainX
08/24/2022
Hangcha 1-3.5t R Series Internal Combustion Counterbalanced Forklift Truck: Monthly Maintenance
MaintainX
10/08/2022
Golf Course Standards and Maintenance Procedures: Tees
MaintainX
07/21/2022
Bunn TDO-N-3.5 Dispenser w/Solid Lid, 3.5Gal (13.2L) Oval Style Narrow w/Pinch Tube Iced Tea & Coffee Disp: Daily Cleaning Instructions
MaintainX
12/07/2022
BUNN | Dual® TF ThermoFresh® DBC® Black 120/208V with Funnel Locks - Daily Cleaning Instructions
MaintainX
12/07/2022
JLG BOOM LIFT 450A: Walk-Around Inspection
MaintainX
10/13/2022
KUBOTA MAINTENANCE CHECK POINTS: Daily Maintenance
MaintainX
10/06/2022
Inspection des Echelles et Escabeaux
Laurier
06/15/2023
JLG BOOM LIFTS 80HX + 6: Battery Maintenance
MaintainX
10/12/2022
Winterizing Check List
PH Broughton
02/01/2024
OSHA Poultry Processing Industry : Sanitation Worker
MaintainX
04/26/2021
Daikin Skyline Semi-Custom Outdoor Air Handler MD5 VFD: Every 6 Years Maintenance
MaintainX
08/10/2022
Mack | 2010 Mack CLX Australia Right Hand Drive - Initial Valve Adjustment Intervals
MaintainX
12/28/2022
JLG Telehandlers 3707PS: Warm-Up Check
MaintainX
10/13/2022
Building 20 Emergency Light Inspection
Pernod RIcard
07/05/2024
JLG Vertical Mast EcoLift 70: Function Check
MaintainX
10/13/2022
Standard Vehicle Fleet Preventive Management and Standard Operating Procedures
MaintainX
07/19/2022
Generac Diesel Generators MMG45IF4: General Maintenance (John Deer Engine)
MaintainX
09/02/2022
Noritz NR66-SV-NG - Maintenance
MaintainX
08/24/2022
AHU Service
Radisson Blu Hotel Larnaca
04/14/2024
Hoshizaki Ice Machine F-450MAJ(-C) FD-650MAH-C, MWH-C, MRH-C F-801MAJ(-C), MWJ(-C) F-1002MAJ(-C), MWJ(-C), MRJ(-C), MLJ FD-1002MAJ-C, MRJ-C F-1501MAJ(-C), MWJ(-C), MRJ(-C) F-2001MWJ, MRJ/3(-C), MLJ Cleaning and Sanitizing Checklist
MaintainX
10/08/2022
Generac Diesel Generators MMG45IF4: Annual Maintenance (John Deer Engine)
MaintainX
09/06/2022
Mack | Mack Pinnacle (CXU) - During the First 5000 Kilometers (3000 Miles)
MaintainX
12/28/2022
JLG BOOM LIFTS 120SXJ : Daily Walk-Around Inspection
MaintainX
10/13/2022
Generac Diesel Generators MMG120: As Required Maintenance (John Deer Engine)
MaintainX
09/02/2022
BUNN | VP17-2, Stainless (1 Upper/1 Lower Warmer) - Daily Cleaning Instructions
MaintainX
12/07/2022
Packwest Capper / Weekly
BioLab
04/13/2023
Urgent Repair
Proactive MD
03/29/2022
Toyota Pallet Trucks 6HBC40 : Scheduled Maintenance Every Two Months or 250 Operating Hours
MaintainX
11/15/2022
MAINTENANCE CHECKLIST FOR POWER CONSOLES
Kasi Technologies Inc.
07/20/2022
Precedent® Rooftop Units: Periodic Maintenance
MaintainX
08/06/2022
Hot Tub: Annual Maintenance Checklist
MaintainX
09/08/2022
Ice Machine Cleaning
Phil Stocker Co
07/19/2022
Bobcat Loader Mechanic Skid Steer 742: Every 1000 Hours Maintenance
MaintainX
12/07/2022
Caterpillar 72H PIPELAYER - Maintenance | Semi-Annual
MaintainX
08/10/2022
Bunn AXIOM® DV-3 Dual Volt (2 Upper/1 Lower Warmer): Cleaning Instructions
MaintainX
12/07/2022
Kitchen Equipment Preventive Maintenance Checklist
MaintainX
07/23/2022

Explore by industry

Manufacturing / Industrial
Property Management
General
Food & Beverage / Retail
Fleet Management
Hospitality
Healthcare

Copyright © 2024 MaintainX. All rights reserved.

Company
About
Careers
Privacy Policy
Terms of Service

Product
Features
Pricing
Blog

Support
FAQ
API
GDPR