General • Inspections

Generac Diesel Generators MMG25FHICAN6: Every 50 Hours Maintenance (Kubota Engine)

This procedure is for the basic maintenance of your equipment by replacing the engine oil and filter and oil filter element replacement. By followig the recommended interval maintenance procedure, this will help ensure that your equipment performs at its most efficient for a long period of time.

MaintainX

08/24/2022

Generac Diesel Generators MMG25FHICAN6: Every 50 Hours Maintenance (Kubota Engine)

NOTICE!

Use the schedule in the following table as a guide for regular maintenance intervals. For additional or replacement copies of the engine operator’s manual, contact an authorized dealer in your area.

Basic Maintenance Procedure:

Check Fuel Pipes
Drain water separator
Change engine oil (Change the engine oil and oil filter after the initial 50 hours of operation, then at the appropriate interval thereafter)
Replace oil filter cartridge (Change the engine oil and oil filter after the initial 50 hours of operation, then at the appropriate interval thereafter)

Source: MaintainX (Community Member)

NOTICE!

Use the schedule in the following table as a guide for regular maintenance intervals. For additional or replacement copies of the engine operator’s manual, contact an authorized dealer in your area.

Basic Maintenance Procedure:

Check Fuel Pipes

Drain water separator

Change engine oil (Change the engine oil and oil filter after the initial 50 hours of operation, then at the appropriate interval thereafter)

Replace oil filter cartridge (Change the engine oil and oil filter after the initial 50 hours of operation, then at the appropriate interval thereafter)