Back
General • Inspections

MCC PM LOTO Procedure: Housing Support Electrical

This procedure establishes the minimum requirements for the lockout of energy isolating devices whenever maintenance or servicing is done on machines or equipment. It shall be used to ensure that the machine or equipment is stopped, isolated from all potentially hazardous energy sources and locked out before employees perform any servicing or maintenance where the unexpected energizing or start-up of the machine or equipment or release of stored energy could cause injury.
MaintainX
07/26/2022

MCC PM LOTO Procedure: Housing Support Electrical

This procedure establishes the minimum requirements for the lockout of energy isolating devices whenever maintenance or servicing is done on machines or equipment. It shall be used to ensure that the machine or equipment is stopped, isolated from all potentially hazardous energy sources and locked out before employees perform any servicing or maintenance where the unexpected energizing or start-up of the machine or equipment or release of stored energy could cause injury.

    • 1.png

    ENERGY SOURCES

    Energy Source (Magnitude):

    Energy Isolation Point or Control Step:

    Application Method and LOTO Device

    Step #

    • 2.png

    LOCKOUT TAGOUT SEQUENCE

    Notify Employees

    Notify affected employees of LOTO activity

    Equipment Shutdown

    Isolate Energy

    Lockout Energy

    Dissipate Energy

    Verify Isolation

    Perform work

    RESTORE EQUIPMENT TO SERVICE SEQUENCE

    Clear Work Area

    Verify Controls

    Remove Lockout

    Notify Employees

Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.