Generac Diesel Generators MGG100M: Annual Maintenance

The following procedures should be performed at least annually.

• The internal gearing and bushings of the jack must be kept lubricated. Apply a small amount of automotive grease to the internal gearing by removing the jack cover, or if equipped, use a needle nose applicator or standard grease gun on the lubrication point found on the side of the jack near the crank. Rotate the jack handle to distribute the grease evenly.

• A lightweight oil must be applied to the handle unit at both sides of the tube.

• If equipped, the axle bolt and nut assembly of the caster wheel must also be lubricated with the same lightweight oil.