General • Inspections

BUNN | TB3Q, 29" Trunk - Weekly Cleaning Instructions

Use this checklist for the weekly cleaning of your tea brewer. It provides many benefits including general hygiene and improving the taste of your coffee.

MaintainX

12/13/2022

BUNN | TB3Q, 29" Trunk - Weekly Cleaning Instructions

Use this checklist for the weekly cleaning of your tea brewer. It provides many benefits including general hygiene and improving the taste of your coffee.

WEEKLY

Remove and thoroughly rinse the sprayhead. The holes must be open and clear of any mineral deposits. Reattach the sprayhead.
NOTE: Refer to the "Care and Cleaning" card (37244.0000) at http://www.bunnomatic.com/pdfs/commercial/ careclean/37244.0000.pdf for detailed instructions on cleaning and sanitizing the brewer and dispensers.

AUTO SWEETENER CLEANING

Remove the connector off of the bag in a box.
Place the end in a bucket of hot water (120°-130°F)
Place an empty reservoir on the base under the dilution nozzle
Set the selector switch to the "Sweetened" setting
Press and release the "Start" switch.
Run three brew cycles in a row, emptying the reservoir after each cycle.
When the three cycles have been completed, hook the connector back up to the bag in a box system. (This will keep buildup from occurring in the system.)

This procedure should be performed weekly or as needed to keep the system clear.

Source: MaintainX (Community Member)

WEEKLY

Remove and thoroughly rinse the sprayhead. The holes must be open and clear of any mineral deposits. Reattach the sprayhead.

NOTE: Refer to the "Care and Cleaning" card (37244.0000) at http://www.bunnomatic.com/pdfs/commercial/ careclean/37244.0000.pdf for detailed instructions on cleaning and sanitizing the brewer and dispensers.

AUTO SWEETENER CLEANING

Remove the connector off of the bag in a box.

Place the end in a bucket of hot water (120°-130°F)

Place an empty reservoir on the base under the dilution nozzle

Set the selector switch to the "Sweetened" setting

Press and release the "Start" switch.

Run three brew cycles in a row, emptying the reservoir after each cycle.

When the three cycles have been completed, hook the connector back up to the bag in a box system. (This will keep buildup from occurring in the system.)

This procedure should be performed weekly or as needed to keep the system clear.