Back
General • Inspections

30070 - Commercial SiteTank & Pump Inspection Checklist - 3-Monthly

One of the biggest ways to prevent failures is to make sure your equipment is properly aligned and balanced.These programs are designed to keep your maintenance costs low by preventing costly failures before they happen.
MaintainX
04/21/2022

30070 - Commercial SiteTank & Pump Inspection Checklist - 3-Monthly

One of the biggest ways to prevent failures is to make sure your equipment is properly aligned and balanced.These programs are designed to keep your maintenance costs low by preventing costly failures before they happen.

    Overhead/ Aboveground Tanks

    Engineering/ Contractor - Inspect tank shell condition for signs of damage/ deterioration/ leaks

    • Pass
    • Flag
    • Fail

    Engineering/ Contractor - Inspect tank stand condition for damage/ deterioration and secure to bund

    • Pass
    • Flag
    • Fail

    Engineering/ Contractor - Inspect tank straps are in place, in good condition and correctly fastened

    • Pass
    • Flag
    • Fail

    Engineering/ Contractor - Inspect tank safety ladder and platform/ walkways are in good condition and correctly installed/ secured

    • Pass
    • Flag
    • Fail

    Engineering/ Contractor - Check tank free-vents are clear of debris/ foreign objects

    • Pass
    • Flag
    • Fail

    Engineering/ Contractor - Check tank P&V vents for (audible/ visible) leaks

    • Pass
    • Flag
    • Fail

    Engineering/ Contractor - Check fill ine for visible leaks

    • Pass
    • Flag
    • Fail

    Engineering/ Contractor - Check tank dipstick present and not damaged

    • Pass
    • Flag
    • Fail

    Engineering/ Contractor - Check tank outlet fittings and hoses for any signs of deterioration, leaks or loose connections

    • Pass
    • Flag
    • Fail

    Engineering/ Contractor - Check tank low point drain for any signs of leaks or loose connections

    • Pass
    • Flag
    • Fail

    Engineering/ Contractor - Check tank is correctly earthed

    • Pass
    • Flag
    • Fail

    Comment

    Bund

    Engineering/ Contractor - Check bund drain hydrocarbon filter installed and element free of product trace

    • Pass
    • Flag
    • Fail

    Comment

    Pumps

    Engineering/ Contractor - Check electrical wiring is correctly installed/ connected

    • Pass
    • Flag
    • Fail

    Engineering/ Contractor - Check pump hydraulic stack for any signs of leaks/ damage or gaskets to be changed

    • Pass
    • Flag
    • Fail

    Engineering/ Contractor - Check pump display and preset keypad clear and not damaged

    • Pass
    • Flag
    • Fail

    Comment

Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.