Back
Fleet Management • Inspections

Daily Driver Inspection

Follow this procedure for daily inspection of your vehicle before operation to make sure it is in good working condition.
A-Line Iron & Metals
08/22/2023

Daily Driver Inspection

Follow this procedure for daily inspection of your vehicle before operation to make sure it is in good working condition.

    Paperwork

    Unit Number

    Insert Registration Expiration Date

    Insert Insurance Expiration Date

    Insert Annual Inspection Date (when it was done)

    Oil Change Sticker

    Cab

    Check for frays

    Walk Around

    Also check in between mechanism of roll off or lugger trucks (between cylinders, etc)

    (No cracks or leaks)

    (Secure, clean, tags & lights)

    Check All Lights

    As well as high beams

    Check All Fluid Levels

    Tank should be half or a little over half way full- NEVER A FULL TANK

    Under Truck Check

    Check for leaks, lose connections

    Look over rims &check tire pressure

    (Leaf & Coil Springs)

    Check for cracks/weld breaks

    Chambers - Hoses - Drums

    Double check tightness

    Check for leaks

Source: A-Line Iron & Metals (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.