Back
General • Inspections

PM Procedure SMIMO Quarterly

This procedure checklist is for the quarterly preventive maintenance and inspection of your equipment.
MaintainX
07/18/2023

PM Procedure SMIMO Quarterly

This procedure checklist is for the quarterly preventive maintenance and inspection of your equipment.

    Main bearing housings

    Check. Align/Replace if not OK.

    • Pass
    • Flag
    • Fail

    Main bearing

    Open and check. If grease is dirty, replace it.

    • Pass
    • Flag
    • Fail

    Flange bearing

    Check. Replace if not OK.

    • Pass
    • Flag
    • Fail

    Soft packing of drum

    Vertical clamps

    Check operation. Replace if not OK.

    • Pass
    • Flag
    • Fail

    Attachment bolts of complete machine

    Check. Tighten/Replace if not OK.

    • Pass
    • Flag
    • Fail
Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.