Cummins QSK60 G CM2358 K110 - Maintenance - Daily

AIR INTAKE MAINTENANCE

• Check air cleaner restriction indicator (where fitted)

• If the service indicator shows red, replace air cleaner elements and reset the air cleaner service indicator.

• Check air intake system for leaks

• Visually inspect the air intake system for signs of wear or damage

• Check audibly when the generator set is running. To replace, contact your authorized distributor.

COOLING MAINTENANCE

• Check coolant level of radiator

• If low, top up to coolant system specifications level, with Cummins recommended coolant mix.

• Check cooling fan blades and motors

• Visually inspect the fan blades through the guarding for signs of wear or damage. To replace, contact your authorized distributor.

• Check coolant lines and radiator hoses for leaks, wear, and cracks

• Visually check for leaks, worn or damages hoses. To replace, contact your authorized distributor.

• Visually inspect the radiator through the guarding for blockage, build up of debris, signs of wear or damage. To clean or replace, contact your authorized distributor.

CONTROL MAINTENANCE

• Check operation of Control Panel

• Check display (the system will perform a control panel test on initial activation). To replace, contact your authorized distributor.

EXHAUST MAINTENANCE

• Check all exhaust components, and hardware (fittings, clamps, fasteners, etc.)

• Visually inspect the exhaust system for signs of wear or damage.

• Check audibly when the generator set is running. To replace, contact your authorized distributor.

• Check exhaust condensation trap

• Drain condensation into a suitable container. Dispose of fluids in accordance with local legislation.

GENERATOR SET MAINTENANCE

• General GenSet inspection

• Oil pan heater

• Engine oil level and reservoir (optional)

• Coolant level

• Coolant heater(s)

• Battery heater (optional)

• Control heater (optional)

• Breather heater (optional)

Daily Maintenance Procedures

• Monitor fluid levels, oil pressure, and coolant temperature frequently.

• During operation, be alert for mechanical problems that could create unsafe or hazardous conditions.