Fitness Equipment Preventative Maintenance (Electrical Requirements): Weekly

Treadmills

Unplug the power cord. Inspect and properly tighten all external parts of the treadmill.
Apply a mild multi-purpose cleaner to a 100 percent cotton cloth and remove any dust and grime from the handrails, uprights, foot rails, frame, and motor hood. In addition, wipe the walking platform along the sides of the walking belt. Do not wipe under the walking belt. Apply a small amount of mild multi-purpose cleaner to a 100 percent cotton cloth and wipe the console and the screens. Do not spray cleaner directly onto the treadmill or use ammonia or acid-based cleaners.
Make sure that the walking belt is centered and properly tightened. If it is centered and runs smoothly, do not make any adjustments. If the walking belt needs to be adjusted, refer to your owner’s manual for belt tension adjustment procedures.

Inspect and tighten all parts of the equipment. Replace any worn parts immediately.
To clean the bike or elliptical, use a damp cloth and a small amount of mild soap. For ellipticals, make sure to regularly clean the track wheels and the track frame on which the track wheels ride. IMPORTANT: To avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight.
Check to ensure the machine is level. If the elliptical exerciser rocks slightly on your floor during use, adjust the leveling feet beneath the stabilizers and/or frame until the rocking motion is eliminated.