General • Inspections

Preventative Maintenance Tips for Automated Conveyor Systems

Preventive maintenance of conveyors is necessary to avoid unwanted interruptions, caused by failures or malfunctions, which would block the transport of materials along machinery

MaintainX

07/28/2022

Preventative Maintenance Tips for Automated Conveyor Systems

Preventive maintenance of conveyors is necessary to avoid unwanted interruptions, caused by failures or malfunctions, which would block the transport of materials along machinery

Ensure proper use of all conveyor systems.

Make sure that conveyors aren’t being overloaded or run at too-high speeds; this can lead to overstress of the system’s gears, motors, and more. In general, units should be used as designed and described by the manufacturer.

Make sure all maintenance and repairs are performed by trained personnel.

Conveyors are specialized machines, and require someone who knows what they’re looking at to diagnose and maintain. Hire qualified maintenance employees rather than relying on untrained opinions from line workers or other employees.

Maintenance should be regularly performed.

This means sticking to a schedule, and working down an established checklist. Checks should be performed regularly, as often as possible.

Here’s a good sample checklist for a general conveyor system:

Visual check – look for obvious wear, damage, or unusual equipment behavior.

Ensure all safety guards and covers are in place.

Cleanliness check – make sure dust, dirt, debris, and other accumulations are cleared from the surface of the conveyor.

If any belt misalignment has been observed by workers or inspectors during operation, be sure to correct the tracking to its intended position. Depending on the system, belt alignment may have to be performed while the belt is in motion; be sure to observe all necessary safety precautions as laid out by the manufacturer and OSHA.

Check any pneumatic components are operating at proper pressure levels.

Check motor for proper function. Excessively hot motors should be replaced, as this is an indication of strain.

Keep good records.

Any time there’s an inspection or repair, anything observed or replaced should be meticulously detailed in company records. This will help identify patterns that can lead to better routine maintenance and better use of equipment for the best performance down the line.

Source: MaintainX (Community Member)