General • Maintenance

VariTrane™ Fan-Powered Series Terminal - Maintenance

This periodic maintenance of your equipment is necessary for efficient operation. This routine maintenance consists of inspecting and replacing the air filters of the fan powered terminals.

MaintainX

10/24/2021

VariTrane™ Fan-Powered Series Terminal - Maintenance

This periodic maintenance of your equipment is necessary for efficient operation. This routine maintenance consists of inspecting and replacing the air filters of the fan powered terminals.

Periodic maintenance of the VariTrane™ product is minimal, but necessary for efficient operation. Routine maintenance consists of inspecting/replacing the air filters of the fan-powered terminals.

Motors: Both the Permanent Split Capacitor( PSC) and the Electrically Commutated Motor (ECM) require no lubrication during its normal life of operation.

Fan Wheel

Routinely inspect the fan wheel for dirt or debris and cleaned as necessary

Filter

Routinely inspect and/or replace the filter on fan powered terminals depending on the environmental conditions of the plenum.

Filter Change Out

To remove the filter, turn each of the filter retaining clips 90° (CW or CCW)
Remove the filter and replace with new filter of the same frame size.
Return the filter clips to their retaining position by turning them 90° (CW or CCW) back to their original position.

Water Coil

Periodically inspect water coils and clean fins.
Water coils are provided with an access panel as standard to assist with inspection and cleaning.

Source: Trane (www.trane.com)

Periodic maintenance of the VariTrane™ product is minimal, but necessary for efficient operation. Routine maintenance consists of inspecting/replacing the air filters of the fan-powered terminals.

Motors: Both the Permanent Split Capacitor( PSC) and the Electrically Commutated Motor (ECM) require no lubrication during its normal life of operation.

Fan Wheel

Routinely inspect the fan wheel for dirt or debris and cleaned as necessary

Filter

Routinely inspect and/or replace the filter on fan powered terminals depending on the environmental conditions of the plenum.

Filter Change Out

To remove the filter, turn each of the filter retaining clips 90° (CW or CCW)

Remove the filter and replace with new filter of the same frame size.

Return the filter clips to their retaining position by turning them 90° (CW or CCW) back to their original position.

Water Coil

Periodically inspect water coils and clean fins.

Water coils are provided with an access panel as standard to assist with inspection and cleaning.