Fire Protection Electrical Equipment LOTO Procedure (Life Safety)
This procedure establishes the minimum requirements for the lockout of energy isolating devices whenever maintenance or servicing is done on machines or equipment. It shall be used to ensure that the machine or equipment is stopped, isolated from all potentially hazardous energy sources and locked out before employees perform any servicing or maintenance where the unexpected energizing or start-up of the machine or equipment or release of stored energy could cause injury.
Fire Protection Electrical Equipment LOTO Procedure (Life Safety)
This procedure establishes the minimum requirements for the lockout of energy isolating devices whenever maintenance or servicing is done on machines or equipment. It shall be used to ensure that the machine or equipment is stopped, isolated from all potentially hazardous energy sources and locked out before employees perform any servicing or maintenance where the unexpected energizing or start-up of the machine or equipment or release of stored energy could cause injury.
ENERGY SOURCES
Energy Source (Magnitude):
Energy Isolation Point or Control Step:
Application Method and LOTO Device
Step #
Energy Source (Magnitude)
Energy Isolation Point or Control Step
Application Method and LOTO Device
Step #
Visual Reference
LOCKOUT TAGOUT SEQUENCE
Notify Employees
Notify affected employees of LOTO activity
Equipment Shutdown
Isolate Energy
Lockout Energy
Dissipate Energy
Verify Isolation
Perform work
RESTORE EQUIPMENT TO SERVICE SEQUENCE
Clear Work Area
Verify Controls
Remove Lockout
Notify Employees
Source: MaintainX (Community Member)