SHARP Autobagger Monthly PM
Follow the monthly inspection of your equipment to ensure proper working condition and help prolong your its life span.
Lululemon-Vancouver
10/31/2023
SHARP Autobagger Monthly PM
Follow the monthly inspection of your equipment to ensure proper working condition and help prolong your its life span.
SHARP Autobagger Weekly PM
Weekly inspection of your equipment to ensure proper working condition and help prolong life span.
Lock Out Tag Out
Perform LOTO as necessary
Inspect overall machine for integrity. ensure all cable connections are tight.
Inspect Heater Bar and Sealer Bar for build up, check teflon for burn spots
Rotate Heater Bar Teflon sheet if necessary if no longer rotates replace. if teflon tape is burnt, replace.
Clean Funnel and seal area
Inspect bag out sensor for cleanliness
Inspect all rollers for cleanliness and for noise level.
use scotch brite pad to clean aluminum rollers as necessary.
Clean guide rollers as necessary
Inspect entire machine for loose bolts or nuts
Inspect Drive Belt for excessive wear and tear. Verity belt is not loose. If looseness or wear are found, replace belt.
Clean Filter Element of the Exhaust Fan and the Filter Element from side of Electrical Cabinet.
Check Seal Bar and Obstruction Sensing Jaw for excessive wear and replace if needed.
use scotch brite pad to clean aluminum rollers as necessary.
Source: Lululemon-Vancouver (Community Member)