Crown Walkie Pallet Trucks PW 3000: Battery Maintenance

WHEN YOU INSTALL OR CHANGE BATTERIES

• Turn the truck OFF. Check that all controls are in neutral.

• Make certain you use the correct size and weight battery. Never operate a truck that has an underweight or undersized battery installed.

• Never let anything metal touch the top of the cells. You could cause sparks or do damage to the battery. Use an insulator (such as plywood) when necessary.

• Use an approved spreader bar to place a battery in, or remove it from, the battery compartment or a stand. Make sure you adjust the spreader bar hooks to fit the battery.

USING A ROLLER STAND

• If you use a roller stand to install or remove a battery, make sure the roller stand is the same height as the rollers in the truck's battery compartment. Also make sure the roller stand is at least as long as your battery.

AFTER INSTALLING YOUR BATTERY

• Replace the battery retainers. Make certain the retainers on both sides of the truck are in place.

• Connect the battery. Turn the truck ON and check truck operation.