Back
Manufacturing / Industrial • Maintenance

Doosan G15S-5 Pneumatic Forklift 1500 Hours/ 9 Months

The Doosan G15S-5 Pneumatic Forklift 1500 Hours/ 9 Months completely covers all parts of the forklift. Ensure that the quality of the forklift is maintained by performing 9 months maintenance.
MaintainX
04/26/2021

Doosan G15S-5 Pneumatic Forklift 1500 Hours/ 9 Months

The Doosan G15S-5 Pneumatic Forklift 1500 Hours/ 9 Months completely covers all parts of the forklift. Ensure that the quality of the forklift is maintained by performing 9 months maintenance.

    You must read and understand the warnings and instructions contained in the Safety section of this manual, before performing any operation or maintenance procedures.

    Drive Axle Oil (Shoe Brake) - Change

    See topic, “Drive Axle Oil - Change” in “First 50 - 100 Service Hours”

    Inspect Ignition System (LP-Gas, Gasoline & Dual Fuel Engines Only)

    G420F(E) Engine

    Replace LP Fuel Filter Element (LP-Gas, Dual Fuel Engine Only)

    Park the lift truck in an authorized refueling area with the forks lowered, parking brake applied and the transmission in Neutral.

    • sdsd.PNG

    Fuel Filter (LP - Gas Engine Only)

    Disassembly

    Testing Fuel Lock-off Operation (LP-Gas Engine Only)

    NOTE : The length of time the engine runs on trapped fuel vapor increases with any increase in distance between the fuel lock-off and the pressure regulator/converter.

    (1) LP fuel lock-off (2) Regulator / couverter (3) Fuel Trim valve (FTV)

Source: Doosan

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.