Fleet Management • Inspections

FORKLIFT PRE-OPERATIONAL INSPECTION CHECKLIST

This checklist provides pre-operational and operational checks you can do before and after starting the forklift; that will only take a few minutes to ensure your safety, the safety of the people around you and the safety of your forklift.

MaintainX

07/21/2022

FORKLIFT PRE-OPERATIONAL INSPECTION CHECKLIST

This checklist provides pre-operational and operational checks you can do before and after starting the forklift; that will only take a few minutes to ensure your safety, the safety of the people around you and the safety of your forklift.

Some of the critical forklift inspections recommended for safe operations include:

Check for any fluids that may be present on the floor which may suggest cracked hoses

Check fluid levels for oil, hydraulic fluid, coolant, and water in batteries (if applicable)

Inspect the tire condition by checking for any balding spots, cracks, cuts, or gouges in tires that need to be addressed

Check the condition of the forks including the top clip retaining pin and heel

Confirm backrest extension is working properly

Ensure all warning decals and plates are in place and legible

Confirm that the operational manual is present on forklift and is legible

Affirm that the operator’s area is clear of debris that could interfere with operations

Be sure all safety gear (seat belt, back up alarm, horn) is in working order

Source: MaintainX (Community Member)