ADDISON Addison RC Series Outdoor Condensing Units Maintenance

The Addison RC Series Outdoor Condensing Units Maintenance provides quality maintenance steps for your machine. Remove risks by following the safety steps.

MaintainX

04/26/2021

ADDISON Addison RC Series Outdoor Condensing Units Maintenance

The Addison RC Series Outdoor Condensing Units Maintenance provides quality maintenance steps for your machine. Remove risks by following the safety steps.

Prior to any maintenance or service to the unit, shut off, lockout and tagout the electrical disconnect and fuel valve (if applicable) that supplies the unit in accordance with OSHA regulations and, if the unit includes electric or gas heat, allow ample t

After maintenance is performed or the unit is serviced, the unit shall be re-commissioned per the start-up procedure as outlined in Section 13.

Installation Code and Quarterly Inspections:

All installation and service of ADDISON® equipment must be performed by a contractor qualified in the installation and service of equipment sold and supplied by Addison and conform to all requirements set forth in the ADDISON® manuals and all applicable g

To help facilitate optimum performance and safety, Addison recommends that a qualified contractor conduct, at a minimum, quarterly inspections of your ADDISON® equipment and perform service where necessary, using only replacements parts sold and supplied

DANGER: ELECTRICAL SHOCK HAZARD Disconnect electric before service. More than one disconnect switch may be required to disconnect electric from equipment. Equipment must always be properly grounded.

SEVERE INJURY HAZARD: Do not enter equipment while in operation. Equipment may start automatically. Do not operate with access doors open. Installation, operation, and maintenance must be performed by a trained technician only.

Failure to follow these instructions can result in death, electrical shock, or injury.

WARNING: EXPLOSION HAZARD System contains R-410A refrigerant. Operating pressures may exceed limits of R-22 service equipment. Use proper refrigerant handling practices, tools, and equipment. Failure to follow these instructions can result in death, injur

BURN HAZARD : Allow equipment to cool before service. Internal components of equipment may still be hot after operation.

FALLING HAZARD : Use proper safety equipment and practices to avoid falling. Do not use any part of the equipment as a support.

Failure to follow these instructions can result in death, injury, or property damage.

Source: Addison