Back
General • Inspections

Daikin Roofpak Heating and Cooling IM 738-2: Every 2000 Hours Maintenance

This procedure is for your equipment's supply and return fans—Supply and return fan motors should have grease added after every 2000 hours of operation. This will help maintain your equipment's stability and high performance.
MaintainX
08/10/2022

Daikin Roofpak Heating and Cooling IM 738-2: Every 2000 Hours Maintenance

This procedure is for your equipment's supply and return fans—Supply and return fan motors should have grease added after every 2000 hours of operation. This will help maintain your equipment's stability and high performance.

    Bearing Lubrication

    Motor Bearings

    Supply and return fans—Supply and return fan motors should have grease added after every 2000 hours of operation. Use one of the greases shown in Table 25 on page 115.

    Using the following procedure, relubricate the bearings while the motor is warm, but not running.

    Condenser fan—Condenser fan motors are permanently lubricated and require no periodic lubrication.

Source: MaintainX (Community Member)

Please note that any procedure, checklist, or other document available in the MaintainX Procedure Hub is provided for general education and information only and does not constitute legal, medical, or financial advice. MaintainX makes the materials available AS IS and AS PROVIDED, without warranties of any kind. By downloading or using any such materials, you assume the risk that they may not be appropriate for your specific situation and agree that you are solely responsible for any such use, including compliance with applicable law and with meeting any conditions of product warranties.